Description
Autorange Digital Multimeter
- State of the Art ergonomic design and styling for easier handling and use.
- Full auto ranging range selection.
- Manual range selection function.
- Large 3 1/2 digit LCD display with analog bar graph.
- AC/DC Voltage measurement up to 600 Volt.
- Manual or automatic VDC/VAC selection.
- DC current measurement up to 10 A.
- Resistance measurements up to 32 MOHM.
- Display data hold.
- Continuity Test.
- Diode test.
- Overload protection.
- Soft holster for instrument protection.
- Auto power off.
- Power source: Two Standard 1.5 Volt alkaline battery type AA UM3 or equivalent.
- Test probes: One red and one black, 1000V/15A rated (IEC1010/EN61010 CAT II), 35.5 inches long.
- Physical dimensions: 5.51 x 2.75 x 1.41 inches (140 mm x 70 mm x 36)
- Weight: Approximately 12.34 ounces (350 g) including battery
Applications - Measure output in sensors like oxygen (O2), coolant temperature, throttle position (TPS), manifold air, pressure (MAP) manifold air flow (MAF), etc.
- Check grounds, Voltage drops and continuity across Connectors, Wires, Cables, Relays Contacts, Lamps, Switches, etc.
- Check components like Alternator, Diodes, Relays Coils, Condensers, Ignition Coils, Spark Plug Wires, Magnetic Pick-ups, Motors, Switches, Fuses, etc.
- An essential tool for all around troubleshooting of electrical and electronic circuit and systems.
Ergonomic Features: - The new smaller and ergonomic profile compared with other models makes handling and operation easier and more convenient.
- Large easy to read 7/16 inch (11 mm) digits display.
- Analog bar graph display.
- Single knob selects function.
- Range hold function.
- Rugged plastic enclosure.
- Rugged plastic enclosure.
- Soft anti-slip rubber holster protects the instrument against impacts and chemicals.
- Design allows comfortable hand holding or resting at convenient places horizontally or at an angle by using the stand at the back of the holster.
For use in: Electronic and electrical circuits, Automobiles, Trucks, Trailers, Boats, RVs, All 0 to 6000 Volt AC/DC powered circuits.
General Specifications: - 3.5 Digit LCD (Max reading 3999)
- 7/16 inch(11 mm) Digits
- 32 segments bar graph display.
- Display data hold indicator.
- Manual range indicator.
- VDC/VAC indicator.
- Automatic over-range indication.
- Automatic(-) negative polarity indicator.
- Automatic Zeroing.
- Low battery indicator.
Electrical Specifications:
DC Voltage: ±0.8 percent ± 2 dgts., 2MOhm input impedance, 600 V ac/dc Overload protection.
AC Voltage: ±1.2 percent ± 5 dgts., 2MOhm input impedance, 50 to 200 Hz, 600 V ac/dc Overload protection.
DC Current: ± 1.5 percent ± 2 dgts., Internal 200mA/10A 250V fuse protection.
AC Current: ± 1.5 percent ± 5 dgts., Internal 200mA/10A 250V fuse protection.
Resistance: ±1.2 percent ± 3 dgts., 250 V ac/dc Overload protection.
Diode test: 1.0 ± 0.6 mA test current, 3.2 V max. test voltage.
Continuity Test: Audible indicator (Buzzer) with circuit resistance is below 18 Ohm.
